综合物探方法在汤上屯地热勘探中的应用研究     

龙凡  韩天成 《地下水》2004,26(1):43-47

本文通过联剖、电测深、磁法和测温法等综合工作成果,分析、推断出汤上屯热水构造的产状、性质和热水出露条件,圈定出了热水分布范围.  相似文献   

Evidence for freeze–thaw events and their implications for rock weathering in northern Canada     

Kevin Hall 《地球表面变化过程与地形》2004,29(1):43-57

Discussions regarding weathering in cold environments generally centre on mechanical processes and on the freeze–thaw mechanism in particular. Despite the almost ubiquitous assumption of freeze–thaw weathering, unequivocal proof of interstitial rock water actually freezing and thawing is singularly lacking. Equally, many studies have used the crossing of 0 °C, or values close to that, as the basis for determining the number of ‘freeze–thaw events’. In order to assess the weathering regime at a site in northern Canada, temperatures were collected at the surface, 1 cm and 3 cm depth for sets of paving bricks, with exposures both vertical and at 45°, orientated to the four cardinal directions. Temperature data were collected at 1 min intervals for 1 year. These data provide unequivocal proof for the occurrence of the freezing and thawing of water on and within the rock (freeze–thaw events). The freeze event is evidenced by the exotherm associated with the release of latent heat as the water actually freezes. This is thought to be the ?rst record of such events from a ?eld situation. More signi?cantly, it was found that the temperature at which freezing occurred varied signi?cantly through the year and that on occasion the 1 cm depth froze prior to the rock surface. The change in freeze temperature is thought to be due to the chemical weathering of the material (coupled with on‐going salt inputs via the melting of snowfall), which, it is shown, could occur throughout the winter despite air temperatures down to ?30 °C. This ?nding regarding chemical weathering is also considered to be highly signi?cant. A number of thermal stress events were also recorded, suggesting that rock weathering in cold regions is a synergistic combination of various chemical and mechanical weathering mechanisms. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

类石材料--灰泥的冻融过程     

Takashi Ono 《冰川冻土》2004,26(Z1):64-69

Serious failure on the slope of rock ground can be caused by a cyclic action of freezing and thawing in the cold regions. The frost susceptibility and the effect of freezing and thawing onthe rock material, however, have not been well investigated. In order to find out the freezing effect on the rock materials, mortar specimens are frozen as a pseudo-rock material under the constant rate of freezing by means of controlling the temperature of both ends of specimen. The freezing process is given one-dimensionally to the cylindrical samples in the laboratory to simulate the in-situ freezing phenomena in the natural ground. Formation of ice lens, frost heave and water intake during freezing process are observed on the mortar specimen under constant freezing rate, which probably causes cracks or large deformation in the real rock ground. The values of the velocity of elastic wave propagation are compared before and after freezing process to estimate the degree of weathering due to freezing and thawing.  相似文献   

航空物探平剖图自动绘制的可视化处理   总被引：5，自引：2，他引：5  

刘浩军 《物探与化探》2004,28(2):147-149

简要介绍了航空物探平面剖面图的自动绘制方法,给出了绘制中对一些问题的处理方法;重点介绍了彩色渐变填充着色、彩色渐变渲染着色等几种可视化处理方法,并提出了着色中渐变度、透明度概念及应用方法。  相似文献   

基于扫描法在复杂地层剖面图绘制中的应用     

魏敏  黄地龙  邓飞 《新疆地质》2004,22(1):104-106

论述了基于扫描线填充算法的理论和适用填充剖面图的数据结构．同时应用该算法采用Delphi和OpenGL绘制了某地质工程实例的二维、三维复杂地质填充剖面图，并取得了较好效果．  相似文献   

中国大陆科学钻探主孔1200米构造柱及变形构造初步解析   总被引：31，自引：20，他引：31  

许志琴张泽明  刘福来杨经绥唐哲民  陈世忠柴耀楚李天福  陈方远 《岩石学报》2004,20(1):53-72

在利用成象测井资料准确地恢复岩心空间位置的基础上，建立了位于江苏省东海县毛北村的中国大陆科学钻探主孔岩心1200m精细构造柱。划分了由榴辉岩与超镁铁质岩组成的第一岩性-构造单元及由副片麻岩夹榴辉岩与超镁铁质岩透镜体组成的第二岩性-构造单元，自上而下岩石的面理产状由向东陡倾变为向南东缓倾。第一岩性-构造单元的榴辉岩与超镁铁质岩是毛北榴辉岩杂岩体的组成部分，在榴辉岩中发现以南北向拉伸线理及由北往南的剪切指向为特征的超高压变质岩早期变形举止。位于第二岩性一构造单元下部(770-1130m深度)300多米厚的韧性剪切带是地表出露的毛北韧性剪切带在孔下的延伸，剪切应变及石英组构分析表明，在伴随的退变质角闪岩相一绿帘角闪岩相一绿片岩相的转换过程中，剪切应变由自SE往NW的“逆冲”转为NW向SE的正向滑移。结合钻孔围区地质，重塑了上部由毛北榴辉岩杂岩体与副片麻岩围岩组成的轴面向SE倾斜的同斜倒转褶皱系，以及下部为韧性剪切带的构造模型。钻孔验证了VSP地震反射剖面中850-1200m深度的强反射层与韧性剪切带相吻合。结合苏鲁超高压变质地体的折返构造的研究，提出该构造模型的成因与折返阶段超高压变质地体的斜向上的挤出及后折返阶段的穹隆形成有关。  相似文献   

温州世贸中心大厦钻孔灌注桩施工技术          下载免费PDF全文

詹龙和  金克柏  谢秋明 《探矿工程》2004,31(10):1-3

介绍了温州世贸中心大厦钻孔灌注桩的主要特点和施工难点，以及在生产施工中所采取的主要技术措施，特别针对该工程中风化残留体施工难度大、桩孔深的特点，介绍了相应的处理办法和注意事项。  相似文献   

Thermo-mechanical structure beneath the young orogenic belt of Taiwan     

Kuo-Fong Ma  Teh-Ru Alex Song 《Tectonophysics》2004,388(1-4):21

We investigate the thermo-mechanical properties beneath the young orogenic belt of Taiwan by constructing a shear strength profile from a vertical stratified rheological structure. The stratified rheological structure is estimated based on the recently developed thermal structure and its likely composition. Subduction–collision in the young orogenic belts and the thick accretionary wedge make a significant contribution to the growth of sialic crust in the hinterland. The sialic bulk crust not only results in a low seismic velocity but also produces weak crust in the hinterland. The earthquake depth–frequency distribution in the foreland and hinterland correlates very well with the regimes of the brittle/ductile transition revealed in the strength profile. Our results show that the observed two-layer seismicity in the foreland is due to a moderate geotherm and an intermediate mafic bulk composition; while single-layer seismicity in the hinterland is due to its felsic bulk composition. In the foreland, the mechanically strong crust (MSC) and the mechanically strong lithosphere (MSL) coincide with frequent seismicity. The shallow MSC in the hinterland is consistent with the 20- to 25-km seismicity occurring there. The total lithospheric integrated strength (LIS) in the hinterland is only about half of that in the foreland, suggesting a weak lower crust and lithosphere mantle in the hinterland. The results confirm that the earthquake cutoff depth is a proxy for temperature. The calculated decrease of effective elastic thickness (EET) from the orogenic margin (foreland) to the center (hinterland) is consistent with the results of flexure modeling in most orogenic belts. Due to the weak LIS in the hinterland, crustal thinning and rifting may occur in the future. Our results, thus, suggest that the mechanical structure is also closely related to the composition and is not directly reflected in the thermal structure.  相似文献   

基于物方影像匹配和概率松弛的断面自动提取   总被引：4，自引：0，他引：4  

郑顺义  张祖勋  张剑清 《测绘信息与工程》2004,29(2):26-27

提出了基于物方影像匹配的断面提取,为了提高匹配的可靠性,引入了概率松弛法,最终获得了高精度的断面.  相似文献   

Anabranching in mixed bedrock-alluvial rivers: the example of the Orange River above Augrabies Falls, Northern Cape Province, South Africa     

S. Tooth  T. S. McCarthy 《Geomorphology》2004,57(3-4):235-262

Anabranching is characteristic of a number of rivers in diverse environmental settings worldwide, but has only infrequently been described from bedrock-influenced rivers. A prime example of a mixed bedrock-alluvial anabranching river is provided by a 150-km long reach of the Orange River above Augrabies Falls, Northern Cape Province, South Africa. Here, the perennial Orange flows through arid terrain consisting mainly of Precambrian granites and gneisses, and the river has preferentially eroded bedrock joints, fractures and foliations to form multiple channels which divide around numerous, large (up to 15 km long and 2 km wide), stable islands formed of alluvium and/or bedrock. Significant local variations in channel-bed gradient occur along the river, which strongly control anabranching style through an influence on local sediment budgets. In relatively long (>10 km), lower gradient reaches (<0.0013) within the anabranching reach, sediment supply exceeds local transport capacity, bedrock usually only crops out in channel beds, and channels divide around alluvial islands which are formed by accretion in the lee of bedrock outcrop or at the junction with ephemeral tributaries. Riparian vegetation probably plays a key role in the survival and growth of these islands by increasing flow roughness, inducing deposition, and stabilising the sediments. Less commonly, channels may form by eroding into once-continuous island or floodplain surfaces. In shorter (<10 km), higher gradient reaches (>0.0013) within the anabranching reach, local transport capacity exceeds sediment supply, bedrock crops out extensively, and channels flow over an irregular bedrock pavement or divide around rocky islands. Channel incision into bedrock probably occurs mainly by abrasion, with the general absence of boulder bedforms suggesting that hydraulic plucking is relatively unimportant in this setting. Mixed bedrock-alluvial anabranching also occurs in a number of other rivers worldwide, and appears to be a stable and often long-lived river pattern adjusted to a number of factors commonly acting in combination: (1) jointed/fractured granitoid rock outcrop; (2) erosion-resistant banks and islands; (3) locally variable channel-bed gradients; (4) variable flow regimes.  相似文献